Product name: Polyaluminium Chloride
Aluminum Oxide （Al2O3）Mass Fraction 1%≥27.0
Base Saturability 1% 40-90
Mass Fraction of Water-Insoluble Substances 1% ≤1.5
pH（1% Water Solution ）3.5-5.0
Appearance: solid powder, light yellow
Introduction: Polyaluminium chloride is a new water purification material, inorganic polymer coagulant, and is also referred to as poly aluminum, which is the role of hydroxide ions bridging and polyvalent anion polymerization and the production of molecular weight , High charge of inorganic high molecular water treatment agent. Poly aluminum chloride is golden yellow, khaki, brown, red granular / flaky, purified water quality is better than aluminum sulfate coagulant, the cost of water with the low 15-30%, floc formation of fast, Speed, than the traditional products such as aluminum sulfate processing capacity, it consumes water alkalinity is lower than a variety of inorganic coagulants, which may not cast or less cast alkali agent, to adapt to the source water PH range of 5.0 - 9.0, the corrosion Small, good operating conditions, solubility is better than aluminum sulfate, the source water temperature is better than the adaptability of aluminum sulfate and other inorganic coagulant.
1) purification of urban water supply and drainage
2) industrial water purification and treatment, including the printing and dyeing wastewater, paper-making wastewater, etc.
3) recycling of the useful material in the industrial waste water and residual
4) strengthening the settlement of powdered coal in the coal-washing wastewater
Shipping: shipped in 3-5 days after payment
Packaging: Compound plastic woven bag with polyethylene liner,net weight 25Kg